消减舰船变形的影响和为全舰提供高精度姿态基准

引用国内外一些文献列举的现代舰船船体变形的数据，论证了消减船体变形的影响和为全舰提供精确的姿态基准的重要意义。对舰载航向姿态基准的功能、性能与特点进行了综述。介绍了基于激光陀螺和光纤Bragg光栅传感器测量船体变形的新方法。最后，探讨了分布式姿态基准系统的技术方案。     

Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models

In this study, two multi-scale analyses codes are newly developed by combining a homogenization algorithm and an elastic/crystalline viscoplastic finite element (FE) method (Nakamachi, E., 1988. A finite element simulation of the sheet metal forming process. Int. J. Numer. Meth. Eng. 25, 283–292; Nakamachi, E., Dong, X., 1996. Elastic/crystalline viscoplastic finite element analysis of dynamic deformation of sheet metal. Int. J. Computer-Aided Eng. Software 13, 308–326; Nakamachi, E., Dong, X., 1997. Study of texture effect on sheet failure in a limit dome height test by using elastic/crystalline viscoplastic finite element analysis. J. Appl. Mech. Trans. ASME(E) 64, 519–524; Nakamachi, E., 1998. Elastic/crystalline viscoplastic finite element modeling based on hardening–softening evaluation equation. In: Proc. of the 6th NUMIFORM, pp. 315–321; Nakamachi, E., Hiraiwa, K., Morimoto, H., Harimoto, M., 2000a. Elastic/crystalline viscoplastic finite element analyses of single- and poly-crystal sheet deformations and their experimental verification. Int. J. Plasticity 16, 1419–1441; Nakamachi, E., Xie, C.L., Harimoto, M., 2000b. Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses. Int. J. Mech. Sci. 43, 631–652); (1) a “semi-implicit” finite element (FE) code and (2) a “dynamic explicit” FE code. These were applied to predict the plastic strain induced yield loci and the formability of sheet metal in the macro scale, and simultaneously the crystal texture and hardening evolutions in the micro scale. The isotropic and kinematical hardening laws are employed in the crystalline plasticity constitutive equation. For the multi-scale structure, two-scales are considered. One is a microscopic polycrystal structure and the other a macroscopic elastic plastic continuum. We measure crystal morphologies by using the SEM-EBSD apparatus with a unit of about 3.8 μm voxel, and define a three dimensional (3D) representative volume element (RVE) for the micro polycrystal structure, which satisfy the periodicity condition of crystal orientation distribution. A “micro” finite element modeling technique is newly established to minimize the total number of finite elements in the micro scale. Next, the “semi-implicit” crystallographic homogenization FE code, which employs the SEM-EBSD measured RVE, is applied to the 99.9% pure-iron uni-axial tensile problem to predict the texture evolution and the subsequent yield loci in the various strain paths. These “semi implicit” results reveal that the plastic strain induced anisotropy in the micro and macro levels can be predicted by our FE analyses. The kinematical hardening law leads a distinct plastic strain induced anisotropy. Our “dynamic-explicit” FE code is applied to simulate the limit dome height (LDH) test problem of the mild steel DQSK, the high strength steel HSLA and the aluminum alloy AL6022 sheet metals, which were adopted as the NUMISHEET2005 Benchmark sheet metals (Smith, L.M., Pourboghrat, F., Yoon, J.-W., Stoughton, T.B., 2005. NUMISHEET2005. In: Proc. of 6th Int. Conf. Numerical Simulation of 3D Sheet Metal Forming Processes, PART A and B(Benchmark), pp. 409–451) to estimate formability. The “dynamic explicit” results reveal that the initial crystal orientation distribution has a large affects to a plastic strain induced texture and anisotropic hardening evolutions and sheet formability.     

Application of X-ray diffraction, micromagnetic and hole drilling methods for residual stress determination in a ball bearing steel ring

A basic understanding of distortion problems requires the analysis of a complete manufacturing process including an almost complete overview of residual stress states in the component during each production step. To reduce the measurement time in the future, three measurements methods (X-ray diffraction, micromagnetic and blind hole drilling methods) have been used to analyze residual stress states in machined AISI 52100 ball bearing rings. X-ray diffraction was used as a state-of-the-art method for machining induced residual stresses with pronounced gradients. The ring exhibited a complex residual stress state with high tensile residual stresses at the surface, a strong gradient in depth, and also showed some variation along the outer circumference due to a superimposition of machining induced residual stresses and effects from the clamping device process. Due to this surface state, micromagnetic signals depend on the analyzing frequency. A calibration of the signals was only possible with the X-ray diffraction data. The results of the three different measurement methods correlate reasonably well.     

压力场中光纤应变测量方法研究

本文对压力场环境下的光纤应变测量方法进行了研究，在理论上分析了由于测试环境的压力变化产生虚假应变的原因，提出了采用补偿的方法消除虚假应变。通过具有补偿功能的马赫－泽得干涉系统对应变场进行了测量，证明了补偿法的可靠性，为光纤应变测量方法向实用化转变进行了有益的探讨。     

A rigorous assessment of the benefits of miniaturization in the Kolsky bar system

A rigorous experimental and numerical assessment is made of the benefits and limits of miniaturization in the Kolsky bar system. The primary issues that arise in very high strain rate testing (stress equilibration, inertial effects, wave dispersion, friction, and controllability of deformations) are addressed through experiments coupled with explicit finite element analyses. A miniaturized Kolsky bar system that includes the input bar is developed, together with the use of the laser occlusive radius detector to obtain local measurements of specimen strain during the very high rate deformations. It is demonstrated that this miniaturized Kolsky bar system can be used to provide fully validated results, including the explicit determination of equilibration, over a very wide range of strain rates (1×10³ to 5×10⁴ s⁻¹). The desired high strain rate can be achieved even at low accumulated strains, and the total strain developed can be controlled very effectively. Specific conditions are developed for determining the range of utility of the technique for a given material. The technique is applied to the characterization of 6061-T651 aluminum, and the results are compared with the results obtained using a conventional Kolsky bar.     

双柱单锥型液-液旋流管内流场的激光诊断

应用激光测速仪，对一种双柱单锥型液 液旋流管内的流动结构，进行了全场范围内的多工况流动诊断研究．揭示出其切向速度由内旋流区和外旋流区构成，其中内旋流区中的速度分布符合准强制涡关系，外旋流区中的速度分布符合准自由涡关系；轴向速度由上行流动区和下行流动区构成，两者之间在直管段以零速点作分界，在锥体段则以零速区作过渡并伴随有一定的回流出现，且该过渡区或回流区的大小随锥体截面的收缩而减小，直到进入直管段后消失；各湍流量的分布以管芯处最大向外逐渐减小，沿轴向是直管段中的湍流度大于锥体段中的湍流度，而且湍流度在旋流管内具有各向异性的特性．     

Density-sensitive whole-field flow measurement by optical speckle photography

An optical whole-field, line-of-sight method is surveyed that allows the measurement of the refractive deflection angles of light transmitted through a flow with density changes. The method uses the principles of speckle photography. In comparison to classical optical methods such as interferometry, a much higher number of data values can be obtained from one record without the need of interpolating between experimental data. This high signal density is particularly advantageous for analyzing turbulent flows with density fluctuations. Such an analysis is, so far, restricted to the existence of axisymmetric turbulence. A number of applications to this type of turbulent flow are reported, and proposals are made for future developments that will allow this speckle technique to be applied to the study of turbulent shear flow.     

Pressure-sensitive paint in aerodynamic testing

Pressure-sensitive paint (PSP) is a relatively new aerodynamic measurement tool with the unique capability of providing a field measurement of pressure over a test surface. An introductory review of this technology is presented, which is confined to the application of the PSP method to aircraft development wind tunnel testing. This is at present the primary application area and thus the focus of research on the use of the method, and is the authors' own area of research. Described are PSP fundamentals, the various elements comprising PSP technology, and current limitations and considerations in applying this technology. Experimental results are presented to illustrate the present capability of the method. The few publications currently available on this subject in the open literature are also referenced.     

Micro- and Nanoscale Deformation Measurement of Surface and Internal Planes via Digital Image Correlation

The digital image correlation (DIC) technique is successfully applied across multiple length scales through the generation of a suitable speckle pattern at each size scale. For microscale measurements, a random speckle pattern of paint is created with a fine point airbrush. Nanoscale displacement resolution is achieved with a speckle pattern formed by solution deposition of fluorescent silica nanoparticles. When excited, the particles fluoresce and form a speckle pattern that can be imaged with an optical microscope. Displacements are measured on the surface and on an interior plane of transparent polymer samples with the different speckle patterns. Rigid body translation calibrations and uniaxial tension experiments establish a surface displacement resolution of 1 μm over a 5×6 mm scale field of view for the airbrushed samples and 17 nm over a 100×100 μm scale field of view for samples with the fluorescent nanoparticle speckle. To demonstrate the capabilities of the method, we characterize the internal deformation fields generated around silica microspheres embedded in an elastomer under tensile loading. The DIC technique enables measurement of complex deformation fields with nanoscale precision over relatively large areas, making it of particular relevance to materials that possess multiple length scales.     

An experimental technique for measuringtransient natural/forced convective heatfluxes in a vertical channel

A series of systematic experiments for measuring transient natural andforced convected heat fluxes in a one-sided heated vertical channel have beenconducted. The total heat input in transient natural and forced experiments iscomposed of four kinds modes: radiative heat loss, conductiveheat lossm, thermal capacity of the plate, and convective heat transfer in thetest channel. In the transient periods, the generalized correlations for estimatingtransient convective heat flux are proposed in natural and forced convectionexperiments. By using the proposed q_c^″ distributions, satisfactory agreementsare achieved between the transient Nu_x predictions and experimentaldata.